Assa Abloy SARGENT FM7300 Series Installation Instructions Manual page 16

Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
4 Optional Installation (cont.)
a Dogging Indicator Installation (cont.)
Install the indicator on the inside of the door using supplied 10-24 x 2" oval head screws. Make sure the
control fingers grab the top rod pin as shown. (Figure 32)
Check for proper operation. Rotate the lever until the indicator window shows a single latch point.
(Figure 33)
Note:
To dog the top and bottom latches in a retracted state, fully rotate the lever and move the slider on the
indicator to the left.
1-800-727-5477 • www.sargentlock.com
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
Control Fingers
Pin
Figure 32
Single Latch 3-Latch
Point Points
Indicator
Window
Figure 33
16
Side View
A8220D 04/20