Install Lockbody Cassette (Lbc); Latch Rod Guides - Assa Abloy SARGENT FM7300 Series Installation Instructions Manual

Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
5 Addendum (cont.)
c

Install Lockbody Cassette (LBC)

• Using the supplied 3/32" Allen wrench, rotate both
LBC worm gears to align
slots in the LBC gears to the orientation shown.
(Figure 36)
Alignment is needed for
proper installation of the
rod guide. (Step 3h)
• Slide the LBC into the door case and secure with
two (2) #12-24x1" flat head screws.
(Figure 37)
d

Latch Rod Guides

• Rod guides help installation by directing the rod
into location in the LBC within the door cavity.
• Pull rod guides away from latches on both
rods until they stop. (Figure 38)
1-800-727-5477 • www.sargentlock.com
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
Worm Gear
Slot
Before
Figure 38
LBC Gear
Worm Gear
Figure 36
Figure 37
Note:
Bolt retainer clips
must remain attached
until step 5g.
After
18
Retainer Clip
A8220D 04/20