Install Bottom Strike - Assa Abloy SARGENT FM7300 Series Installation Instructions Manual

Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
3 Installation (cont.)
g

Install Bottom Strike

• Close the door and mark the location of the bottom bolt.
• Open the door and place the strike over the bottom bolt location. Mark the location of the bottom
strike pocket and hole locations. (Figure 7)
Note:
The strike is not symetric. Install as shown. If needed, the strike can later be rotated to increase bolt
clearance. (Figure 8)
1-800-727-5477 • www.sargentlock.com
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
Narrow
Wide
Bottom Strike Pocket
✓
3/8" MAX
Bottom of door
to floor.
Figure 7
Door Swing
Figure 8
8
Jamb
A8220D 04/20