Secure Top Latch; Tighten Set Screw - Assa Abloy SARGENT FM7300 Series Installation Instructions Manual

Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
5 Addendum (cont.)
i

Secure Top Latch

• Install four (4) 10-24 oval head
screws on the face of the door.
(Figure 44)
• Install six (6) 1/4-20 flat
head screws in the top edge of the
door. (Figure 45)
Note:
Do not fully tighten until all
screws are installed.
• Install two (2) screw retainers
(top latch only).
• Install two (2) #4-40 flat head
screws (top latch only).
j

Tighten Set Screw

Using the supplied 1/8" Allen wrench, tighten the set screw to secure the rod to the LBC. (Figure 46)
IMPORTANT
Latches will not retract if the set screw is not tightened.
1-800-727-5477 • www.sargentlock.com
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
Figure 44
Figure 45
Figure 46
21
A8220D 04/20