Install Center Strike Into Door Frame; Remove Retractor Inserts; Check Latches (Uninstalled) - Assa Abloy SARGENT FM7300 Series Installation Instructions Manual

Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
3 Installation (cont.)
d

Install Center Strike into Door Frame

• Install two (2) ¼-20 socket cap flat head screws.
(Figure 3)
e

Remove Retractor Inserts

WARNING
The door now has the ability to latch.
(Figure 4)
f

Check Latches (uninstalled)

• Insert the uninstalled outside mortise trim and
rotate to verify the top and bottom latches
retract flush with the door. Do not install
mortise trim at this time. (Figure 5)
• Move the top strike back and forth until the top latch engages the strike. (Figure 6)
1-800-727-5477 • www.sargentlock.com
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
TOP OF DOOR FRAME
Figure 4
Figure 6
7
Figure 3
Figure 5
A8220D 04/20