Table of Contents
Advertisement
DT9000
The display
In the case of an error
message
20171205-V2
6. Display and manual controls
6.1. The first start-up
The display is indicated by the arrow (1)
After the instrument has been installed and connected into
the current loop, first you see on the display the type of
instrument:
,
resolution of 3 decimals.
If anything else appears on the display instead of the
numbers showing the current value (e.g. a message with
blinking letters), then it is an error message of the
instrument.
In order to define the error more accurately, please go to
Chapter 10.3. Error messages or 10.4. Messages of
critical errors, found at the end of this Manual, in the
Appendix.
, than the current in mA, with a
21
Advertisement
Table of Contents
