Display And Manual Controls; The First Start-Up - Datcon DT9002 Operating Instructions Manual

The display
In the case of an error
message
18

6. Display and manual controls

6.1. The first start-up

The display is indicated by the arrow (1)
After the instrument has been installed and connected into
the current loop, first you see on the display the type of
 
instrument: ,
resolution of 3 decimals.
If anything else appears on the display instead of the
numbers showing the current value (e.g. a message with
blinking letters), then it is an error message of the
instrument.
In order to define the error more accurately, please go to
Chapter 10.3. Error messages or 10.4. Messages of
critical errors, found at the end of this Manual, in the
Appendix.
, than the current in mA, with a
DT9002
20180621-V1