CHV-TSTATEX
Mounting
1
Mount the thermostat directly to
drywall or to a single-gang box in
accordance with accepted building
codes and practices. If using the
single-gang box, be sure to fill it with
thermal insulation material.
For additional details and installation
options, refer to the latest version of
the CHV-TSTATEX Operations &
Installation Guide (Doc. 6989). It is
available from the Crestron® Web site
(www.crestron.com/manuals).
DIP Switch Settings
Power Steal Switch
STEAL
(LEFT)
LEFT SWITCH
#
DESCRIPTION
ON
4
System Type
Heat/Cool
3
Heat Pump Mode
Aux Heat
2
Cool/HP Stages
1
1
Heat Stages
1
RIGHT SWITCH
#
DESCRIPTION
ON
4
Fan In Heat
Disabled
3
Change Over Outputs
Disabled
2
Cool SP Range
Normal
1
N/A
N/A
1
For details, refer to the latest version of the
CHV-TSTATEX Operations & Installation Guide, Doc. 6989.
QUICKSTART DOC. 6990B (2027559)
®
infiNET EX
Thermostat
2
Connections
Connect the thermostat using the four most typical wiring configurations shown below as a guide. Refer to "DIP Switch Settings" on the left to
configure each application. For more information, refer to the latest version of the CHV-TSTATEX Operations & Installation Guide (Doc. 6989).
Single Stage Heat-Only Application
24VAC
(RIGHT)
Heat Pump Application With
Integrated Controller
OFF
Heat Pump
Dual Fuel
2
2
OFF
Enabled
Enabled
Extended
N/A
RH and RC must be
jumpered together.
www.crestron.com
01.12
Specifications subject to
change without notice.
DIP Switch Settings
System
Heat
Transformer
C
Relay
R
Optional, for power
DIP Switch Settings
Optional, for power
C
System
E - U - W
Aux Heat
Transformer
C
Relay
R
O
Changeover
Valve
Y
Compressor
Relay
G
Fan
Relay
R
888.273.7876
201.767.3400
Single Stage Cool-Only Application
DIP Switch Settings
C
Y
Compressor
Relay
G
Fan
Optional,
Relay
for power
R
Heat - Cool Application With
Integrated Control Unit
DIP Switch Settings
Optional, for power
C
W
Heat
Relay
Y
Cool
Relay
G
Fan
Relay
R
RH and RC must be
jumpered together.
System
Transformer
C
R
System
Transformer
C
R
Need help?
Do you have a question about the CHV-TSTATEX and is the answer not in the manual?
Questions and answers