2. Remove the cylinder holding nuts,
cylinder and cylinder gasket.
Piston pin and piston
1. Remove one piston pin clip from piston.
NOTE: _ _ _ _ _ _ _ _ _ _ _ _
Before removing the piston pin clip, cover the
crankcase with a clean rag so you will not ac-
cidentally drop the clip into the crankcase.
2.
Remove the piston pin using the piston
pin puller.
Crankcase cover, right
1. Remove the shifter cover.
2.
Remove the guide from
crankcase
cover.
3-4
1. Shift guide
2. Ball holder
3. Compression spring
4. Guide
3.
Remove right crankcase cover screws
and cover. The cover can be removed
without removing the Autolube pump.
Clutch assembly and primary drive gear
1. Remove the shift lever.