Enabling Black Leveling; Operating Multiple Projectors - Christie H Series User Manual

Enabling black leveling

Use black leveling to modify the pixels in the bright overlapping areas that result from the overlapping
of two or more images.
1. In the Projector Control dialog, switch to the Black Level tab.
2. To enable black leveling, select Enable.
3. To select a control point, type W, A, S, or D.
4. Use the mouse to drag and position the control point at the required location.
5. To fine tune the position, use the arrow keys.
6. To set the color of the selected area, click on the first row of the palette.
7. In the Color Palette dialog, select a color and click OK.
8. To control the transparency of the black level area, enter a transparency value.
9. To apply the settings, click Overwrite.

Operating multiple projectors

Use the New Blending feature to operate multiple projectors.
To enable New Multi-Function, from the File menu, select New Blending.
The Blending Settings dialog appears.
H Series, HS Series, GS Series (700, 850) Warping and Blending User Manual
020-000807-02 Rev. 1 (07-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Warping and blending
9