Daily Use; Functions - IKEA FINPUTSAD Manual

2. SWITCH ON THE DISHWASHER
ENGLISH
3. LOAD THE RACKS (see LOADING THE RACKS)
4. FILLING THE DETERGENT DISPENSER
(see PROGRAMS TABLE).

Daily Use

5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE
1. Check water connection
Check that the dishwasher is connected to the water supply
DESCRIPTION)
and that the tap is open.
2. Switch on the dishwasher
6. START
Open the door and press the ON/OFF button.
3. Load the racks (see LOADING THE RACKS)
4. Filling the detergent dispenser
(see PROGRAMS TABLE).
5. Choose the program and customise the cycle
Select the most appropriate program in accordance with
the type of crockery and its soiling level (see PROGRAMS
DESCRIPTION) by pressing the button.
7. END OF WASH CYCLE Select the desired options (see FUNCTIONS).
6. Start
Start the wash cycle by pressing START/Pause button (led
flashing of the wash cycle number on the display. Open the
is lit) and closing the door within 4 sec. When the program
starts you hear a single beep. If the door was not closed
within 4sec., the alarm sound will be played. In this case,
open the door, press START/Pause button and close the door
again within 4 sec.
7. End of wash cycle
The end of the wash cycle is indicated by beeps and by the
flashing of the wash cycle number on the display. Open the
door and switch off the appliance by pressing the ON/OFF
button.
1. ECO - Normally soiled crockery. Standard program, the most efficient in terms of its combined energy and water
Wait for a few minutes before removing the crockery - to
avoid burns. Unload the racks, beginning with the lower one.
consumption.
2. NORMAL - Mixed soil. For normally soiled dishes with dried food residues.
If an option is not compatible with the selected program
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used

Functions

for delicate items).
4. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
FLEXIBLE WASH
If there are not many dishes to be washed, a half
If an option is not compatible with the selected program
5. FAST - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.
loading may be used in order to save water, electricity
6. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform
and detergent.
maintenance of the dishwasher.
Select the program and then press the FLEXIBLE
WASH button: the symbol of the chosen rack will
7. SELF- CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance
appear on the display.
using hot water.
By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button
To wash only the specific rack, press this button repeatedly:
repeatedly:
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED � � � �rapidly 3 times
shown on the display (only upper rack)
and beeps will sound. The option will not be enabled.
If an option is not compatible with the selected program
shown on the display (only cutlery rack)
HALF LOAD
shown on the display (option is OFF and the appliance
will wash dishes in all racks).
reduce the amount of detergent accordingly.
Remember to load the upper or lower rack only, and to reduce
If upper rack is removed, please apply detergent
the amount of detergent accordingly. If upper rack is removed,
directly to tub instead of detergent dispenser.
reduce the amount of detergent accordingly.
please apply detergent directly to tub instead of detergent
dispenser.
Remember to halve the amount of detergent.
If upper rack is removed, please apply detergent
DELAY
directly to tub instead of detergent dispenser.
DELAY
The start time of the program may be delayed for a
period of time between 1 and 12 hours.
appears on the display; each time you press the button,
1. Press the DELAY button: the corresponding «h»
symbol appears on the display; each time you press
appears on the display; each time you press the button,
the button, the time (1h, 2h, etc. up to max. 12h) from
the start of the selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches off and the wash cycle begins.
To adjust the delay time and select a shorter period
The DELAY function cannot be set once a wash cycle
of time, press the DELAY button. To cancel it, press
the button repeatedly until the selected delayed start
indicator light «h» switches off.
The DELAY function cannot be set once a wash
cycle has been started.
The DELAY function cannot be set once a wash cycle
has been started.
The DELAY function cannot be set once a wash cycle
(see PROGRAMS
(see OPTIONS AND FUNCTIONS)
To wash only the specific rack, press this button repeatedly:
1 12
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser.
appears on the display; each time you press the button,
extended periods of inactivity, in order to minimise electri-
To wash only the specific rack, press this button repeatedly:
city consumption. If the crockery is only lightly soiled or
if it has been rinsed with water before being placed in the
To wash only the specific rack, press this button repeatedly:
dishwasher, reduce the amount of detergent used accordingly.
MODIFYING A RUNNING PROGRAM
ON/OFF
The machine will switch off automatically during certain
the new wash cycle and any desired options; Start the wash cycle
extended periods of inactivity, in order to minimise
START/Pause
electricity consumption. If the crockery is only lightly soiled
reduce the amount of detergent accordingly.
or if it has been rinsed with water before being placed in the
If upper rack is removed, please apply detergent
ADDING EXTRA CROCKERY
dishwasher, reduce the amount of detergent used
directly to tub instead of detergent dispenser.
reduce the amount of detergent accordingly.
accordingly.
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser.
Modifying a running program
If a wrong program was selected, it is possible to change it,
provided that it has only just begun: open the door, press and
hold the ON/OFF button, the machine will switch off.
Switch the machine back on using the ON/OFF button and select
the new wash cycle and any desired options; Start the wash
ACCIDENTAL INTERRUPTIONS
appears on the display; each time you press the button,
cycle by pressing START/Pause button and closing the door
within 4 sec.
appears on the display; each time you press the button,
Adding extra crockery
Without switching off the machine, open the door (START/
Pause led starts blinking) (be ware of HOT steam!) and place the
crockery inside the dishwasher. Press the START/Pause button
and close the door within 4 sec., the cycle will resume from the
point at which it was interrupted.
Accidental interruptions
If the door is opened during the wash cycle, or if there is a
power cut, the cycle stops. Press the START/Pause button and
The DELAY function cannot be set once a wash cycle
close the door within 4 sec., the cycle will resume from the point
at which it was interrupted.
The DELAY function cannot be set once a wash cycle
SHORT TIME
This option can be used to reduce the duration of the
, the corresponding LED flashes rapidly 3 times
main programs while maintaining the same washing
and drying performance levels. After selecting the
program, press the SHORT TIME button and the
indicator light will switch on. To deselect the option,
press the same button again.
EXTRA DRY
If you use powder or liquid detergent, this option
To improve the drying of the dishes, after selecting
should be off.
the program, press the EXTRA DRY button and the
If you use powder or liquid detergent, this option
(see CONTROL PANEL)
should be off.
indicator light comes on. A higher temperature
during the final rinse and an extended drying phase
A higher temperature during the final rinse and an extended
allow for improving drying. To deselect the option,
press the same button again. The EXTRA DRY option
A LED light projected on the floor indicates that the
A LED light projected on the floor indicates that the
results in the lengthening of the wash cycle.
, the corresponding LED flashes rapidly 3 times
A higher temperature during the final rinse and an extended
TABLET (Tab)
TABLET (Tab)
This setting allows you to optimize the performance
stays off during the cycle and flashes at the end of the
of the program according to the type of detergent
used. Press the START/PAUSE button for 3 seconds
Make sure the cap is screwed on tightly, so that no detergent can
c) The light stays on during the cycle and flashes at the
stays off during the cycle and flashes at the end of the
(the corresponding symbol will light up) if you use
get into the container during the wash program (this could damage
combined detergents in tablet form (rinse aid, salt
the water softener beyond repair).
c) The light stays on during the cycle and flashes at the
first few seconds or the entire duration of the countdown, and detergent in 1 dose).
As soon as this procedure is complete, run a program without
If you use powder or liquid detergent, this option
If you use powder or liquid detergent, this option
loading. The "Pre-Wash" program alone is NOT� � � � � �
should be off.
should be off.
If you use powder or liquid detergent, this option
Residual saline solution or grains of salt can lead to corrosion,
should be off. irreparably damaging the stainless steel components.
first few seconds or the entire duration of the countdown,
OPERATION INDICATOR
The guarantee is not applicable if faults are caused by such
A LED light projected on the floor indicates that
NaturalDry
A LED light projected on the floor indicates that the
to confirm the selection. circumstances.
the dishwasher is working. One of the following
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
operating modes can be selected:
Operation Indicator will not flash at the end of cycle.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
a) Disabled function.
heating element may be damaged as a result.
stays off during the cycle and flashes at the end of the b) When the cycle starts the light goes on for a few
Whenever you need to add salt, it is mandatory to complete
seconds, stays off during the cycle and flashes at the
the procedure before the beginning of the washing cycle.
c) The light stays on during the cycle and flashes at the
end of the cycle.
c) The light stays on during the cycle and flashes at
SETTING THE WATER HARDNESS
first few seconds or the entire duration of the countdown,
To allow the water softener to work in a perfect way, it is essential
the end of the cycle (default mode). Operation Indicator will not flash at the end of cycle.
that the water hardness setting is based on the actual water hard-
If the delayed start was set, the light goes on either
for the first few seconds or the entire duration of the ness in your house. This information can be obtained from your local
water supplier. The factory setting is for average (3) water hardness.
countdown, based on whether mode b) or c) was set.
The light goes off every time the door is opened.
• Switch on the appliance by pressing the ON/OFF button.
To select the mode you prefer, switch on the machine,
• Switch off the appliance by pressing the ON/OFF button.
• Hold down button
Operation Indicator will not flash at the end of cycle. hold down button
E
• Switch on the appliance by pressing the ON/OFF button.
To confirm the change and exit from the Control Menu please
• The current selection level number and the salt indicator light
E
� � � � � �
To confirm the change and exit from the Control Menu please • Press button
ON/OFF
be ware of HOT steam!
START/Pause
, the corresponding LED flashes rapidly 3 times
s.
to confirm the selection.
(INSTALLATION GUIDE)
to confirm the selection.
for 5 seconds, until you hear a beep.
until one of the three letters
d
d
to select the desired hardness level (see
10
START/Pause
START/Pause
ADJUS
If you a
The c
the dish
FILLIN
� � � �
dishwa
useof d
To
To