Product Description; Control Panel; First Use - IKEA FINPUTSAD Manual

ENGLISH

Product description

1
3
5
6
9
Service:
0000 000 00000
11

Control panel

1 2 3 4
1 On-Off/Reset button with indicator light
2
Program selection button
1
3 Salt refill indicator ligh
Rinse Aid refill indicator ligh
4
1. On-Off/Reset button with indicator light
5
Program number and delay time indicator
2. Program selection button
6
Tablet indicator light
3. Salt refill indicator ligh
7
Display
4. Rinse Aid refill indicator ligh
5. Program number and delay time indicator
6. Tablet indicator light

First Use

ADVICE REGARDING THE FIRST TIME USE
Advice regarding the first time use
After installation, remove the stoppers from the racks and the After installation, remove the stoppers from the racks and the
retaining elastic elements from the upper rack.
retaining elastic elements from the upper rack
FILLING THE SALT RESERVOIR
Filling the salt reservoir
The use of salt prevents the formation of LIMESCALE on the
The use of salt prevents the formation of LIMESCALE on the
dishes andon the machine's functional components.
dishes andon the machine's functional components.
• It is mandatory that THE SALT RESERVOIR BE NEVER EMPTY.
• It is important that the salt reservoir be never empty.
• It is important to set the water hardness.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher
The salt reservoir is located in the lower part of the
(see PRODUCT DESCRIPTION) and should be filled when the
dishwasher (see PRODUCT DESCRIPTION) and should be
SALT REFILL indicator light
filled when the SALT REFILL indicator light
control panel is lit .
1 2
1. On-Off/Reset button with indicator light
2. Program selection button
3. Salt refill indicator ligh
h
6 8 9 10
5
7
2 3 4 5 6 7 8
in the control panel is lit .
3 4 5 6 7 8 9
1
Upper rack
2
2
Cutlery rack
Foldable flaps
3
4
4
Upper rack height adjuster
5
Upper sprayer arm
6
Lower rack
7
7
Lower sprayer arm
8
Filter Assembly
9
Salt reservoir
8
10
Detergent and Rinse Aid dispensers
11
Control pannel
10
3sec
11 12 13
1.
2.
8
Flexible Wash indicator light
3.
9
Flexible Wash button
4.
11
9 10
10
Delay button
5.
11
Short Time button with indicator light
6.
7. Display
12
Extra Dry button with indicator light
7.
8. Half Load indicator light
13
8.
START/Pause button with indicator light / Tab
9. Half Load button
9.
10. Delay button
10. Detergent and Rinse Aid dispensers
11. Rating plate
11. START/Pause button with indicator light / Tab
12. Control panel
in the
10 11
7. Display
8. Half Load indicator light
9. Half Load button
1. Upper rack
2. � � � � � � �
3. Upper rack height adjuster
4. Upper sprayer arm
5. Lower rack
6. Cutlery basket
7. Lower sprayer arm
8. Filter Assembly
9. Salt reservoir
10. Detergent and Rinse Aid dispensers
11. Rating plate
12. Control panel
1 2 3 4 6 7
5
50° 50°-60° 65° 50° 50° 45° 50°
Upper rack
� � � � � � �
Upper rack height adjuster
Upper sprayer arm
Lower rack
Cutlery basket
Lower sprayer arm
Filter Assembly
Salt reservoir
1. Remove the lower rack and
1. Remove the lower rack and
unscrew the reservoir cap
unscrew the reservoir cap
(anticlockwise).
(anticlockwise).
Only the first time you do this:
2.
2. Only the first time you do this: fill
fill the salt reservoir with water.
the salt reservoir with water.
Position the funnel (see figure)
3.
3. Position the funnel (see figure)
and fill the salt reservoir right up
and fill the salt reservoir right up
to its edge (approximately 1 kg); it
to its edge (approximately 1 kg);
is not unusual for a little water to
it is not unusual for a little water to
leak out.
leak out.
4. Remove the funnel and wipe
4. Remove the funnel and wipe any
any salt residue away from the
salt residue away from the
opening.
opening.
7
8 9 10
10 PROGRAMS
65° 65°