Table of Contents
Advertisement
ENGLISH
Daily use
1. Open the water tap.
2. Press and hold
activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the
programme is complete.
Using the detergent
1
3
A
Put the detergent or
the multi-tablet in
compartment (A).
If the programme has a prewash phase, put
a small quantity of detergent on the inner
part of the appliance door.
until the appliance is
2
4
When you use multi-tablets that contain salt
and rinse aid, it is not necessary to fill the
salt container and the rinse aid dispenser.
• Adjust the water softener to the lowest
level.
• Set the rinse aid dispenser to the lowest
position.
Multi-tabs containing salt are not
effective enough to soften hard
water.
How to select and start a programme
1. Press the button dedicated to the
programme you want to set.
• The light related to the button is on.
• The display shows the programme
duration.
2. Activate applicable options if desired.
3. Close the appliance door to start the
programme.
How to select and start the
programme
1. To select
, press and hold
seconds.
• The light related to the button is on.
• The display shows the programme
duration.
Options are not applicable to this
programme.
2. Close the appliance door to start the
programme.
How to activate options
1. Select a programme.
18
for 3
Advertisement
Table of Contents
