Daily Use; Functions - IKEA FINPUTSAD Instruction Manual

Check that the dishwasher is connected to the water supply
and that the tap is open.
2. SWITCH ON THE DISHWASHER
ENGLISH
Open the door and press the ON/OFF button.
3. LOAD THE RACKS (see LOADING THE RACKS)
4. FILLING THE DETERGENT DISPENSER
(see PROGRAMS TABLE).
Daily Use
5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE
Select the most appropriate program in accordance with the
1. Check water connection
type of crockery and its soiling level (see PROGRAMS
Check that the dishwasher is connected to the water supply
DESCRIPTION) by pressing the
and that the tap is open.
Select the desired options (see OPTIONS AND FUNCTIONS).
2. Switch on the dishwasher
6. START
Open the door and press the ON/OFF button.
3. Load the racks (see LOADING THE RACKS)
Start the wash cycle by pressing START/Pause button (led
4. Filling the detergent dispenser
is lit) and closing the door within 4 sec. When the program
(see PROGRAMS TABLE).
starts you hear a single beep. If the door was not closed within
5. Choose the program and customise the cycle
4sec., the alarm sound will be played. In this case, open the
Select the most appropriate program in accordance with
door, press START/Pause button and close the door again
the type of crockery and its soiling level (see PROGRAMS
within 4 sec.
DESCRIPTION) by pressing the button.
Select the desired options (see FUNCTIONS).
7. END OF WASH CYCLE
6. Start
The end of the wash cycle is indicated by beeps and by the
Start the wash cycle by pressing START/Pause button (led
flashing of the wash cycle number on the display. Open the
is lit) and closing the door within 4 sec. When the program
door and switch off the appliance by pressing the ON/OFF
starts you hear a single beep. If the door was not closed
button.
within 4sec., the alarm sound will be played. In this case,
Wait for a few minutes before removing the crockery - to avoid
open the door, press START/Pause button and close the door
again within 4 sec.
burns. Unload the racks, beginning with the lower one.
7. End of wash cycle
The end of the wash cycle is indicated by beeps and by the

Functions

flashing of the wash cycle number on the display. Open the
door and switch off the appliance by pressing the ON/OFF
OPTIONS AND FUNCTIONS
button.
Wait for a few minutes before removing the crockery - to
1. ECO - Normally soiled crockery. Standard program, the most efficient in terms of its combined energy and water
avoid burns. Unload the racks, beginning with the lower one.
consumption.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
2. NORMAL - Mixed soil. For normally soiled dishes with dried food residues.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
Functions
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used
OPTIONS AND FUNCTIONS
and beeps will sound. The option will not be enabled.
for delicate items).
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
FLEXIBLE WASH
4. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
FLEXI WASH
If there are not many dishes to be washed, a half
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
5. FAST - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.
If there are not many dishes to be washed, a half loading
loading may be used in order to save water, electricity
and beeps will sound. The option will not be enabled.
may be used in order to save water, electricity and
6. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform
and detergent.
FLEXI WASH
detergent.
Select the program and then press the FLEXIBLE
maintenance of the dishwasher.
If there are not many dishes to be washed, a half loading
WASH button: the symbol of the chosen rack will
Select the program and then press the FLEXI WASH button:
7. SELF- CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance
may be used in order to save water, electricity and
appear on the display.
the symbol of the chosen rack will appear on the display.
detergent.
using hot water.
By default the appliance washes dishes in all racks.
Select the program and then press the FLEXI WASH button: By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button
the symbol of the chosen rack will appear on the display.
To wash only the specific rack, press this button repeatedly:
By default the appliance washes dishes in all racks.
repeatedly:
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
shown on the display (only lower rack)
shown on the display (only lower rack)
OPTIONS AND FUNCTIONS
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED � � � �rapidly 3 times
shown on the display (only upper rack)
shown on the display (only upper rack)
shown on the display (only upper rack)
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
and beeps will sound. The option will not be enabled.
shown on the display (only cutlery rack) If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
shown on the display (only cutlery rack)
shown on the display (only cutlery rack)
and beeps will sound. The option will not be enabled.
HALF LOAD
shown on the display (option is OFF and the appliance
ENGLISH
shown on the display (option is OFF and the appliance will
If there are not many dishes to be washed, a half load
will wash dishes in all racks).
wash dishes in all racks).
shown on the display (option is OFF and the appliance will
cycle may be used in order to save water, electricity and
Remember to load the upper or lower rack only, and to
wash dishes in all racks).
reduce the amount of detergent accordingly. detergent. Select the program and press the HALF LOAD
Remember to load the upper or lower rack only, and to reduce
If upper rack is removed, please apply detergent
the amount of detergent accordingly. If upper rack is removed,
Remember to load the upper or lower rack only, and to
button: the indicator light will light up. Press the HALF
directly to tub instead of detergent dispenser.
please apply detergent directly to tub instead of detergent
reduce the amount of detergent accordingly.
LOAD button to deselect this option.
dispenser.
Remember to halve the amount of detergent.
If upper rack is removed, please apply detergent
DELAY
DELAY
DELAY
directly to tub instead of detergent dispenser.
The start time of the program may be delayed for a period
The start time of the program may be delayed for a
of time between 1 and 12 hours.
The start time of the program may be delayed for a period
1. Press the DELAY button: the corresponding «h» symbol
period of time between 1 and 12 hours.
of time between 1 and 12 hours.
appears on the display; each time you press the button,
DELAY
1. Press the DELAY button: the corresponding «h»
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
symbol appears on the display; each time you press
The start time of the program may be delayed for a period
the selected wash cycle will be increased.
appears on the display; each time you press the button,
the button, the time (1h, 2h, etc. up to max. 12h) from
2. Select the wash program, press the START/PAUSE
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
the start of the selected wash cycle will be increased. the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
will begin counting down.
2. Select the wash program, press the START/PAUSE
the selected wash cycle will be increased.
3. Once this time has elapsed, the indicator light «h»
appears on the display; each time you press the button,
button and within 4 seconds close the door: the timer
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
To adjust the delay time and select a shorter period of time,
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
will begin counting down.
repeatedly until the selected delayed start indicator light
2. Select the wash program, press the START/PAUSE switches off and the wash cycle begins.
«h» switches off. 3. Once this time has elapsed, the indicator light «h»
To adjust the delay time and select a shorter period
button and within 4 seconds close the door: the timer
The DELAY function cannot be set once a wash cycle
switches off and the wash cycle begins.
of time, press the DELAY button. To cancel it, press
will begin counting down.
has been started.
To adjust the delay time and select a shorter period of time,
the button repeatedly until the selected delayed start
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
indicator light «h» switches off.
SHORT TIME switches off and the wash cycle begins.
To adjust the delay time and select a shorter period of time,
The DELAY function cannot be set once a wash
repeatedly until the selected delayed start indicator light
This option can be used to reduce the duration of the main
To adjust the delay time and select a shorter period of time,
press the DELAY button. To cancel it, press the button cycle has been started.
«h» switches off.
programs while maintaining the same washing and drying
press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light
performance levels.
The DELAY function cannot be set once a wash cycle
repeatedly until the selected delayed start indicator light
After selecting the program, press the SHORT TIME button
«h» switches off.
has been started.
and the indicator light will switch on. To deselect the option,
«h» switches off.
The DELAY function cannot be set once a wash cycle
press the same button again.
button.
FLEXI WASH
If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and
detergent.
Select the program and then press the FLEXI WASH button:
the symbol of the chosen rack will appear on the display.
By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only, and to
NaturalDry
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent
NaturalDry is a convection drying system which automatically
directly to tub instead of detergent dispenser.
opens the door during/after drying phase to ensure exceptional
drying performance every day. Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
DELAY
when the option of SHORT TIME is on.
The start time of the program may be delayed for a period
As additional steam protection, special designed protection foil is
of time between 1 and 12 hours.
added together with the dishwasher. To see how to mount protec-
1. Press the DELAY button: the corresponding «h» symbol
tion foil please refer to (INSTALLATION GUIDE).
appears on the display; each time you press the button,
NaturalDry functionality could be disabled by the user as follows:
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Go to the Dishwasher software menu pressing and holding
the selected wash cycle will be increased.
button (6 sec).
2. Select the wash program, press the START/PAUSE
2. You are currently in Light Control Menu (please refer to
button and within 4 seconds close the door: the timer
OPERATION INDICATOR description), if you don't want to
will begin counting down.
change anything please press and hold
3. Once this time has elapsed, the indicator light «h»
the two letters appears on the display)
switches off and the wash cycle begins.
3. You switched to NaturalDry Control Menu, you could change
To adjust the delay time and select a shorter period of time,
Select the program and then press the FLEXI WASH button:
extended periods of inactivity, in order to minimise electri-
To wash only the specific rack, press this button repeatedly:
the symbol of the chosen rack will appear on the display.
city consumption. If the crockery is only lightly soiled or
By default the appliance washes dishes in all racks.
shown on the display (only lower rack)
if it has been rinsed with water before being placed in the
To wash only the specific rack, press this button repeatedly:
dishwasher, reduce the amount of detergent used accordingly.
shown on the display (only lower rack)
shown on the display (only upper rack)
MODIFYING A RUNNING PROGRAM
shown on the display (only upper rack)
If a wrong program was selected, it is possible to change it, pro-
shown on the display (only cutlery rack)
vided that it has only just begun: open the door, press and hold
the ON/OFF button, the machine will switch off.
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
Switch the machine back on using the ON/OFF button and select
wash dishes in all racks).
The machine will switch off automatically during certain
the new wash cycle and any desired options; Start the wash cycle
extended periods of inactivity, in order to minimise
shown on the display (option is OFF and the appliance will
Remember to load the upper or lower rack only, and to
by pressing START/Pause button and closing the door within 4 sec.
electricity consumption. If the crockery is only lightly soiled
wash dishes in all racks).
reduce the amount of detergent accordingly.
or if it has been rinsed with water before being placed in the
If upper rack is removed, please apply detergent
Remember to load the upper or lower rack only, and to
ADDING EXTRA CROCKERY
dishwasher, reduce the amount of detergent used
directly to tub instead of detergent dispenser.
reduce the amount of detergent accordingly.
accordingly.
Without switching off the machine, open the door (START/Pause
If upper rack is removed, please apply detergent
led starts blinking) (be ware of HOT steam!) and place the
Modifying a running program directly to tub instead of detergent dispenser.
DELAY
crockery inside the dishwasher. Press the START/Pause button
If a wrong program was selected, it is possible to change it,
and close the door within 4 sec., the cycle will resume from the
The start time of the program may be delayed for a period
provided that it has only just begun: open the door, press and
DELAY
point at which it was interrupted.
hold the ON/OFF button, the machine will switch off. of time between 1 and 12 hours.
Switch the machine back on using the ON/OFF button and select
1. Press the DELAY button: the corresponding «h» symbol
The start time of the program may be delayed for a period
the new wash cycle and any desired options; Start the wash
ACCIDENTAL INTERRUPTIONS
appears on the display; each time you press the button,
of time between 1 and 12 hours.
cycle by pressing START/Pause button and closing the door
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
If the door is opened during the wash cycle, or if there is a power
within 4 sec.
the selected wash cycle will be increased.
appears on the display; each time you press the button,
cut, the cycle stops. Press the START/Pause button and close
2. Select the wash program, press the START/PAUSE the time (1h, 2h, etc. up to max. 12h) from the start of
the door within 4 sec., the cycle will resume from the point at
Adding extra crockery
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
which it was interrupted.
Without switching off the machine, open the door (START/
will begin counting down.
2. Select the wash program, press the START/PAUSE
Pause led starts blinking) (be ware of HOT steam!) and place the
crockery inside the dishwasher. Press the START/Pause button 3. Once this time has elapsed, the indicator light «h»
button and within 4 seconds close the door: the timer
and close the door within 4 sec., the cycle will resume from the
switches off and the wash cycle begins.
will begin counting down.
point at which it was interrupted.
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button switches off and the wash cycle begins.
Accidental interruptions
repeatedly until the selected delayed start indicator light
To adjust the delay time and select a shorter period of time,
If the door is opened during the wash cycle, or if there is a
«h» switches off.
press the DELAY button. To cancel it, press the button
power cut, the cycle stops. Press the START/Pause button and
repeatedly until the selected delayed start indicator light
close the door within 4 sec., the cycle will resume from the point
The DELAY function cannot be set once a wash cycle
«h» switches off.
at which it was interrupted.
has been started.
The DELAY function cannot be set once a wash cycle
has been started.
SHORT TIME
This option can be used to reduce the duration of the main
SHORT TIME
TABLET (Tab)
SHORT TIME
programs while maintaining the same washing and drying
This option can be used to reduce the duration of the
This setting allows you to optimize the performance of
performance levels. main programs while maintaining the same washing
This option can be used to reduce the duration of the main
the program according to the type of detergent used.
and drying performance levels. After selecting the
After selecting the program, press the SHORT TIME button
programs while maintaining the same washing and drying
TABLET (Tab)
Press the START/PAUSE button for 3 seconds (the
program, press the SHORT TIME button and the
and the indicator light will switch on. To deselect the option,
performance levels.
This setting allows you to optimize the performance of
indicator light will switch on. To deselect the option, corresponding symbol will light up) if you use combined
press the same button again.
After selecting the program, press the SHORT TIME button
the program according to the type of detergent used.
press the same button again.
detergents in tablet form (rinse aid, salt and detergent in
Press the START/PAUSE button for 3 seconds (the
and the indicator light will switch on. To deselect the option,
corresponding symbol will light up) if you use combined 1 dose).
EXTRA DRY
EXTRA DRY
press the same button again.
detergents in tablet form (rinse aid, salt and detergent in
To improve the drying of the dishes, after selecting
If you use powder or liquid detergent, this option
1 dose).
To improve the drying of the dishes, after selecting the
the program, press the EXTRA DRY button and the
should be off.
If you use powder or liquid detergent, this option
EXTRA DRY
program, press the EXTRA DRY button and the indicator
indicator light comes on. A higher temperature
should be off.
during the final rinse and an extended drying phase
To improve the drying of the dishes, after selecting the light comes on.
allow for improving drying. To deselect the option,
A higher temperature during the final rinse and an extended OPERATION INDICATOR
program, press the EXTRA DRY button and the indicator
OPERATION INDICATOR
press the same button again. The EXTRA DRY option
drying phase allow for improving drying. To deselect the
light comes on.
A LED light projected on the floor indicates that the
A LED light projected on the floor indicates that the
results in the lengthening of the wash cycle.
dishwasher is working. One of the following operating
option, press the same button again. The EXTRA DRY
A higher temperature during the final rinse and an extended
dishwasher is working. One of the following operating
modes can be selected:
ENGLISH
TABLET (Tab)
TABLET (Tab)
option results in the lengthening of the wash cycle.
drying phase allow for improving drying. To deselect the
a) Disabled function. modes can be selected:
This setting allows you to optimize the performance
TABLET (Tab)
b) When the cycle starts the light goes on for few seconds, option, press the same button again. The EXTRA DRY
This setting allows you to optimize the performance of
a) Disabled function.
of the program according to the type of detergent
stays off during the cycle and flashes at the end of the This setting allows you to optimize the performance of
option results in the lengthening of the wash cycle.
the program according to the type of detergent used.
b) When the cycle starts the light goes on for few seconds,
cycle. the program according to the type of detergent used. used. Press the START/PAUSE button for 3 seconds
Press the START/PAUSE button for 3 seconds (the
Press the START/PAUSE button for 3 seconds (the Make sure the cap is screwed on tightly, so that no detergent can
c) The light stays on during the cycle and flashes at the
stays off during the cycle and flashes at the end of the
(the corresponding symbol will light up) if you use
corresponding symbol will light up) if you use combined
end of the cycle (default mode).
get into the container during the wash program (this could damage
corresponding symbol will light up) if you use combined
cycle.
combined detergents in tablet form (rinse aid, salt
detergents in tablet form (rinse aid, salt and detergent in
If the delayed start was set, the light goes on either for the
the water softener beyond repair).
detergents in tablet form (rinse aid, salt and detergent in
1 dose). and detergent in 1 dose).
c) The light stays on during the cycle and flashes at the
first few seconds or the entire duration of the countdown,
As soon as this procedure is complete, run a program without
If you use powder or liquid detergent, this option
based on whether mode b) or c) was set. 1 dose). If you use powder or liquid detergent, this option
end of the cycle (default mode).
loading. The "Pre-Wash" program alone is NOT� � � � � �
should be off.
The light goes off every time the door is opened. To select
should be off.
If you use powder or liquid detergent, this option
Residual saline solution or grains of salt can lead to corrosion, If the delayed start was set, the light goes on either for the
the mode you prefer, switch on the machine, hold down
should be off. irreparably damaging the stainless steel components.
OPERATION INDICATOR
button P until one of the three letters appears on the display, first few seconds or the entire duration of the countdown,
OPERATION INDICATOR
The guarantee is not applicable if faults are caused by such
press button P until you reach the desired letter (or mode), A LED light projected on the floor indicates that
NaturalDry
A LED light projected on the floor indicates that the based on whether mode b) or c) was set.
hold down button P to confirm the selection. circumstances.
the dishwasher is working. One of the following
dishwasher is working. One of the following operating
The light goes off every time the door is opened. To select
Note: If NaturalDry is active and it opens the door, then Door opening system NaturalDry is a convection drying system
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
modes can be selected:
operating modes can be selected:
Operation Indicator will not flash at the end of cycle.
the mode you prefer, switch on the machine, hold down
a) Disabled function. � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
which automatically opens the door during/after drying phase to
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
heating element may be damaged as a result.
button P until one of the three letters appears on the display,
ensure exceptional drying performance every day. Door opens at
b) When the cycle starts the light goes on for a few
stays off during the cycle and flashes at the end of the
Whenever you need to add salt, it is mandatory to complete
press button P until you reach the desired letter (or mode),
the temperature that is safe to your kitchen furniture.
cycle.
seconds, stays off during the cycle and flashes at the
the procedure before the beginning of the washing cycle.
c) The light stays on during the cycle and flashes at the
hold down button P to confirm the selection.
As additional steam protection, special designed protection foil is end of the cycle.
end of the cycle (default mode).
c) The light stays on during the cycle and flashes at
added together with the dishwasher. To see how to mount protec- Note: If NaturalDry is active and it opens the door, then
SETTING THE WATER HARDNESS
If the delayed start was set, the light goes on either for the
the end of the cycle (default mode).
first few seconds or the entire duration of the countdown,
To allow the water softener to work in a perfect way, it is essential
tion foil please refer to (INSTALLATION GUIDE). Operation Indicator will not flash at the end of cycle.
based on whether mode b) or c) was set.
If the delayed start was set, the light goes on either
that the water hardness setting is based on the actual water hard-
NaturalDry functionality could be disabled by the user as follows:
The light goes off every time the door is opened. To select
for the first few seconds or the entire duration of the ness in your house. This information can be obtained from your local
1. Go to the Dishwasher software menu pressing and holding the mode you prefer, switch on the machine, hold down
water supplier. The factory setting is for average (3) water hardness.
countdown, based on whether mode b) or c) was set.
button P until one of the three letters appears on the display,
button (6 sec).
press button P until you reach the desired letter (or mode),
The light goes off every time the door is opened.
NaturalDry
• Switch on the appliance by pressing the ON/OFF button.
1. Go to the Dishwasher software menu pressing and holding
2. You switched to NaturalDry Control Menu, you could change
hold down button P to confirm the selection.
To select the mode you prefer, switch on the machine,
• Switch off the appliance by pressing the ON/OFF button.
button (6 sec). Note: If NaturalDry is active and it opens the door, then
NaturalDry is a convection drying system which automatically status of NaturalDry functionality by pressing
hold down button
• Hold down button
Operation Indicator will not flash at the end of cycle.
2. You switched to NaturalDry Control Menu, you could change E
opens the door during/after drying phase to ensure exceptional
– enabled
• Switch on the appliance by pressing the ON/OFF button.
status of NaturalDry functionality by pressing
drying performance every day. Door opens at the temperature To confirm the change and exit from the Control Menu please
• The current selection level number and the salt indicator light
E
– enabled
that is safe to your kitchen furniture, thus door will not be opened press and hold � � � � � �
NaturalDry
To confirm the change and exit from the Control Menu please • Press button
NaturalDry is a convection drying system which automatically
when the option of SHORT TIME is on.
EN
until one of the three letters
for 5 seconds, until you hear a beep.
d
– disabled
d
button (until one of
– disabled
button (3 sec).
to select the desired hardness level (see
25
EN
EN
9
11
ADJUS
If you a
11
adjust t
• Switc
• Switc
• Pres
• Switc
•
•
s.
• Switc
Setting
If the rin
supplied
run out
the dish
please f
• If you
• If the
FILLIN
button:
� � � �
button:
dishwa
To achi
useof d
N
N
Na
op
dr
Na
th
op
w
dry
As
tha
ad
wh
tio
As
N
ad
1.
tio
Na
2.
1. G
b
2. Y
O
3.
c
t
3. Y
To
s
pr E
To
pre
The c
Pres
supp
set a