Table of Contents
Advertisement
Chapter 3. Software Installation - Intec ColorCut Pro
3.1 ColorCut Pro Overview
The Intec ColorCut Pro software is a professional cutting package that creates cutting
files directly from Illustrator or CorelDRAW using the vector lines you have drawn,
ColorCut Pro communicates directly with your cutter and ultimately cuts your jobs.
There are two installation versions of ColorCut Pro, a plug-in (which requires Adobe
Illustrator® (MAC or PC) or CorelDRAW® (PC) ) which creates the cutting jobs directly
from your vector lines and can either send your jobs directly to the cutter (PC only)
or create a cut file that can be retrieved at any time using a QR code (automatically
added to the sheet) (MAC & PC clients) then users can cut a different computer (acting
as a production server).
This standalone version known as the ColorCut Pro Job Library server, which can be
installed any PC and directly connected to the Intec LC600 sheet fed cutter.
Intec ColorCut Pro Software
for your Intec ColorCut
Flatbed is supplied on the
included CD, however it may
also be downloaded from our
website
https://intecprinters.com/
support-downloads/drivers-
downloads/colorcut/
Please note:
ColorCut Pro requires a Minimum display resolution : 960×830
The computer directly connected to the ColorCut LC600 must have
Wi-Fi capability for Direct connection to iVision3 Camera Sensor.
For users with no Wi-Fi capabilities a USB Wi-Fi dongle is included.
3.2 ColorCut Pro Installation
Please run the installation program:
SetupColorCutPro.exe
The setup program requires various confirmations for the installation of the program.
On some computers you could be asked the system administrator's password to
execute the installation, in the case you do not have this information; contact the
technician who administrates your system.
Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 23
Advertisement
Table of Contents
