Empty Soiled Water Tank; Clean Soiled Water Tank; Checking The Seal Of The Drain Hose; Checking The Tank Lid Seal - HAKO Scrubmaster B45 CL DTC Instruction Manual

Maintenance and Service

5.6.1 Empty Soiled Water Tank

Clean soiled water tank (Fig. 12/1) at
daily intervals, as required or upon
acoustic signal (increased suction tur-
bine speed).
1. Take machine to appropriate place
for discharge.
2. Park machine such that drain hose
attains drain aperture in the floor.
3. Switch off machine.
Observe the legal provisions
and the local regulations for
disposal of detergents!
4. Take drain hose (Fig. 12/2) from
holder. Bend the drain hose in the
front area.
Turn off the cap.
Put drain hose in the original posi-
tion and empty soiled water tank
completely.

5.6.2 Clean Soiled Water Tank

Clean soiled water tank (Fig. 12/1) at
daily intervals or as required.
1. Empty soiled water tank, see para-
graph 5.6.1.
2. Open tank lid (Fig. 12/4) of the soiled
water tank.
3. Take drain hose (Fig. 12/2) from
holder and empty soiled water tank
completely.
4. Remove remaining dirt by rinsing
with clear water.
5. Rinse drain hose as well.
5.6.3 Checking the seal of the drain
hose
Check the functionality of the seal from
the drain hose (Fig. 12/5) daily and
change it after 125 operating hours at
the latest.
Check drain hose after use of soiling
and clean if required.

5.6.4 Checking the Tank lid seal

Check the functionality of the seal in the
tank cap (Fig. 12/6) daily and change it
after 125 operating hours at the latest.
43