Table of Contents
Advertisement
Installing/mounting
SITRANS F flowmeters with minimum IP65/NEMA 4X enclosure rating are suitable for indoor and
outdoor installations.
• Make sure that pressure and temperature specifications indicated on the device nameplate /
label will not be exceeded.
Installation in hazardous location
Special requirements apply to the location and interconnection of sensor and transmitter.
See Use in hazardous areas (Page 13)
4.1
Installation safety precautions
High pressure hazard
In applications with working pressures/media that can be dangerous to people, surroundings,
equipment or others in case of pipe fracture, we recommend that special precautions such as
special placement, shielding or installation of a pressure guard or a safety valve are taken when
the flowmeter is mounted.
4.2
Sensor installation
4.2.1
Determining a location
Note
The sensor must always be completely filled with liquid.
TRANSMAG 2 with MAG 911/E
Operating Instructions, 03/2021, A5E00102775-AC
WARNING
WARNING
4
19
Advertisement
Table of Contents
