Installing/Mounting; Safety Instructions - Siemens SIPROCESS GA700 Operating Instructions Manual

Continuous gas analysis

Hide thumbs Also See for SIPROCESS GA700:

Table of Contents

Installing/mounting

5.1

Protection against incorrect use of the field device

Only use the field device within the voltage limits specified on the nameplate.

Damage to the membrane keyboard

Make sure that the membrane keyboard is not damaged during installation of the device.

Wetted parts unsuitable for the process medium

Danger of injury or damage to device.

Hot, toxic and corrosive media could be released if the process medium is unsuitable for the

wetted parts.

• Ensure that the material of the device parts wetted by the process medium is suitable for the

Violation of the maximum permissible operating pressure

Danger of injury or poisoning.

The maximum permissible operating pressure depends on the device version. The device can

be damaged if the maximum permissible operating pressure is exceeded. Hot, toxic and

corrosive process media can be released.

Make sure that the device is suitable for the maximum permissible operating pressure of your

system. Refer to the information on the nameplate and/or in Chapter →Technical specifications

(Page 73).

Exceeding the maximum ambient and process medium temperature

Danger of explosion in hazardous areas.

Device damage.

Make sure that the maximum permissible ambient and process medium temperature of the

device is not exceeded. Refer to the information in Chapter → Technical specifications

(Page 73).

Field device

Operating Instructions, 05/2022, A5E35640463-07

WARNING

CAUTION

WARNING

medium. Refer to the information in Chapter → Technical specifications (Page 73).

WARNING

Table of Contents