Table of Contents
Advertisement
entered value is rejected, an error message briefly appears on the display and then the previous
setting. You can then change it again.
Note
If the
panel) the numeric value or setting option is changed continuously when using the tabular
selection. A numeric input carries over to the next highest position.
If you want to prevent an accidentally changed setting from becoming active, you can exit the
menu item by pressing the
above).
See also
The exact structure of the operating menu is explained in the appendix Parameters (Page 93)
and an overview of the function groups of the menu is offered in chapter: Functions (Page 53).
Operating via BUS communication
The device is integrated into the system as shown below:
Figure 6-2
Line
termination
T
HMI module
(control and
display)
Figure 6-3
TRANSMAG 2 with MAG 911/E
Operating Instructions, 03/2021, A5E00102775-AC
and
operating elements are kept actuated (with your finger continuously on the glass
operating element several times (return to the operating level
HART-
communicator
or
Coupling
module
System integration via HART
FG
max. 31
other devices
System integration via Profibus
RS-232-C
DP/PA coupler
or link
PA
Power
T
supply
D P
PC/laptop with
PROFIBUS-Master
Commissioning
6.1 Operating TRANSMAG 2
230
up to 600
PC/
laptop
43
Advertisement
Table of Contents
