Siemens SITRANS F TRANSMAG 2 Operating Instructions Manual page 117

Unit_Diag_Bit(32) = "Zero point error"
Unit_Diag_Bit(33) = "Power supply failed"
Unit_Diag_Bit(34) = "Configuration invalid"
Unit_Diag_Bit(35) = "Restart"
Unit_Diag_Bit(36) = "Coldstart"
Unit_Diag_Bit(37) = "Maintenance required"
Unit_Diag_Bit(38) = "Characteristics invalid"
Unit_Diag_Bit(39) = "Ident_Number violation"
Unit_Diag_Bit(55) = "Extension Available"
User_Prm_Data_Len = 0
;=========== Description of modules ===============================
;
; Use always the module order specified in this file.
; Use exactly one identifier per module.
; If you don_t want to get the measuring value of a certain module ; from the device with the
input data, use Free place for this module ; instead of another identifier.
;
; For the module 1 you have the choice between these different ; identifiers:
;
; - Free Place
; - Short identifier format (identifier byte)
; - Long identifier format (extended identifier)
;
; For the modules 2, 3 and 4 you have the choice between these ; different identifiers:
;
; - Free Place
; - Long identifier format (extended identifier)
; - Long identifier format, resettable (extended identifier)
; With the "resettable" format it is possible to reset the totalizer,
; transmitting suitable output data to the device.
;---------------------------------------------------------------------
; Free place - usable for each module instead of another identifier
;---------------------------------------------------------------------
Module = "Free place" 0x00
TRANSMAG 2 with MAG 911/E
Operating Instructions, 03/2021, A5E00102775-AC
Profibus Communication
B.9 Device Database File (GSD)
117