Configuring The Ethernet; Switching To Another User Account - EDAN iSe Series User Manual

iSE Series Electrocardiograph User Manual Setting Up the Electrocardiograph
Using fingerprint (if enrolled before)
Tap Fingerprint Identification. Press your finger on the fingerprint reader on the right
side of iSE.
Using user account and password
Enter your user name and password. Tap Log in.
No matter which way you choose, the Patient tab will open after login.
NOTE:
Do not run other applications if available when running iSE, otherwise the system
response will slow down.

2.7 Configuring the Ethernet

To configure the Ethernet for data transmission:
1. Slide the top of the iSE screen down. The notification bar is displayed.
2. Press and hold Ethernet from the bar.
3. Turn Ethernet on.
4. Configure the settings of Ethernet.
5. Tap Save.

2.8 Switching to Another User Account

If two or more user accounts have been set up, you may need to switch to another user
account.
1. Open the Patient tab.
2. Tap on the icon in the upper right corner of the tab.
3. A message prompts you to log out. Select OK.
4. The login window opens. Enter the user name and password to log in.
- 28 -