Installing The Rear Drive Module Air Shroud - Dell EMC PowerEdge R750 Installation And Service Manual

Figure 68. Removing the rear drive module air shroud
Next steps
1. Replace the rear drive module air

Installing the rear drive module air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the rear drive module air shroud with the rear drive module on the system.
2. Lower the air shroud into the rear drive module until it is firmly seated.
Figure 69. Installing the rear drive module air shroud
shroud.
Safety instructions.
Before working inside your system.
Installing and removing system components 71