Optional Front Bezel; Removing The Front Bezel - Dell EMC PowerEdge R750 Installation And Service Manual

Figure 53. Installing the M.2 SSD module
a. module connector (2)
b. screws (2)
c. modules (2)
Next steps
1. Install the BOSS card.
NOTE: Installing the BOSS card is similar to installing the expansion card riser.
2. Install the air shroud.
3. Follow the procedure listed in

Optional front bezel

NOTE: LCD panel is optional on the front bezel. If the front bezel has an LCD panel, see

Removing the front bezel

The procedure to remove the front bezel with and without the LCD panel is the same.
Prerequisites
1. Follow the safety guidelines listed in the
2. Keep the bezel key handy.
NOTE: The bezel key is part of the LCD bezel package.
Steps
1. Unlock the bezel.
2. Press the release button, and disengage the left end of the bezel.
3. Unhook the right end, and remove the bezel.
56 Installing and removing system components
After working inside your
Safety instructions.
system.
LCD panel section.