Installing R1 And R3 Paddle Cards - Dell EMC PowerEdge R750 Installation And Service Manual

Figure 165. Removing the R1 paddle card
Figure 166. Removing the R3 paddle card
Next steps
1. Replace the paddle cards.

Installing R1 and R3 paddle cards

R1 and R3 paddle cards are supported on 16 x 2.5-inch NVMe direct-attach configuration only.
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the air shroud
4. Remove cooling fan cage
NOTE: Observe the cable routing before disconnecting the cables.
5. Remove the paddle card cable from side wall bracket.
168 Installing and removing system components
Safety instructions.
Before working inside your
or remove the GPU air shroud.
assembly.
system.