Dell EMC PowerEdge R750 Installation And Service Manual page 14

Table of Contents

Advertisement

Table 5. Rear view of the system (continued)
Item
Ports, panels, or slots
13
OCP NIC port (optional)
14
NIC port (1,2)
15
Power supply unit (PSU 1)
NOTE:
For more information, see the Dell EMC PowerEdge R750 Technical Specifications on the product documentation
page.
Figure 9. Rear view of the system with 2 x 2.5-inch rear drive module
Table 6. Rear view of the system with 2 x 2.5-inch rear drive module
Item
Ports, panels, or slots
1
PCIe expansion card riser
1 (slot 1 and slot 2)
2
BOSS S2 module
(optional)
3
Rear handle
4
PCIe expansion card riser
2 (slot 3 and slot 6)
5
Rear drive module
6
USB 2.0 port (1)
7
PCIe expansion card riser
4 (slot 7 and slot 8)
8
Power supply unit (PSU
2)
9
VGA port
10
USB 3.0 port (1)
14
System overview
Icon
Description
● If the system stops responding during POST, press and hold
the system ID button (for more than 5 s) to enter the BIOS
progress mode.
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
The NIC ports are embedded on the LOM card that is connected to
the system board.
For more information about the PSU configurations, see the
Dell EMC PowerEdge R750 Technical Specifications on product
documentation page.
Icon
Description
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see
N/A
This slot supports the BOSS S2 module.
N/A
To lift the system.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
N/A
Enables you to install drives that are supported on your system. For
more information about drives, see the Dell EMC PowerEdge R750
Technical Specifications on product documentation page.
This port is USB 2.0-compliant.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
For more information about the PSU configurations, see the
PowerEdge R750 Technical Specifications on product documentation
page.
For more information about the VGA, see the Dell EMC PowerEdge
R750 Technical Specifications on product documentation page.
This port is USB 3.0-compliant.
theexpansion card guidelines
expansion card guidelines
expansion card guidelines
section.
section.
section.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r750E70sE70s001

Table of Contents