Removing A Memory Module - Dell EMC PowerEdge R750 Installation And Service Manual

Table 52. Intel Persistent Memory 200 series (BPS) Configuration 6 - 12 x RDIMMs/ LRDIMMs, 2 x Intel
Persistent Memory 200 series (BPS) per processor
Total No of Total No of
RDIMMs / Intel
LRDIMMs Persistent
Memory 200
series (BPS)
DIMMs
12 2
12 2
12 2
12 2
12 2
12 2
12 2
12 2
12 2
12 2
12 2
12 2
12 2
12 2
12 2

Removing a memory module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the air shroud
WARNING: The memory modules are hot to touch for some time after the system has been powered off. Allow
the memory modules to cool before handling them.
Steps
1. Locate the appropriate memory module socket.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module
socket to fully open.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
3. Lift the memory module away from the system.
104 Installing and removing system components
1 R/LRDIMM 1 Intel
capacity (GB) Persistent
Memory 200
series (BPS)
capacity (GB)
16 128
32 128
64 128
128 128
256 128
16 256
32 256
64 256
128 256
256 256
16 512
32 512
64 512
128 512
256 512
Safety instructions.
Before working inside your
or remove the GPU air shroud.
Total Standard
Memory Capacity
(GB)
192
384
768
1536
3072
192
384
768
1536
3072
192
384
768
1536
3072
system.
Total PM Supported Modes
Capacity
(GB)
256 AD
256 AD
256 AD
256 AD
256 AD
512 AD
512 AD
512 AD
512 AD
512 AD
1024 AD
1024 AD
1024 AD
1024 AD
1024 AD