System Cover; Removing The System Cover - Dell EMC PowerEdge R750 Installation And Service Manual

Figure 55. Installing the front bezel with the LCD panel

System cover

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Power off the system, and any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
Steps
1. Using a 1/4-inch flat head or a Phillips #2 screwdriver, rotate the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
58 Installing and removing system components