4. Follow the procedure listed in the
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
Figure 78. Removing a drive blank
Next steps
1.
Replace the drive
blank.
Installing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
Steps
Slide the drive blank into the drive slot until the release button clicks into place.
After working inside your
Safety
instructions.
bezel.
Safety
instructions.
bezel.
system.
Installing and removing system components
79