Rear View Of The System - Dell EMC PowerEdge R750 Installation And Service Manual

NOTE: For more information, see the Dell EMC PowerEdge R750 Technical Specifications on the product documentation
page.

Rear view of the system

Figure 8. Rear view of the system
Table 5. Rear view of the system
Item Ports, panels, or slots
1 PCIe expansion card riser
1 (slot 1 and slot 2)
2 BOSS S2 module
(optional)
3 Rear handle
4 PCIe expansion card riser
2 (slot 3 and slot 6)
5 PCIe expansion card riser
3 (slot 4 and slot 5)
6 USB 2.0 port (1)
7 PCIe expansion card riser
4 (slot 7 and slot 8)
8 Power supply unit (PSU
2)
9 VGA port
10 USB 3.0 port (1)
11 iDRAC dedicated port
12 System identification
button
Icon Description
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
that are supported on your system, see the
section.
N/A This slot supports the BOSS S2 module.
N/A To lift the system.
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
This port is USB 2.0-compliant.
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
For more information about the PSU configurations, see the
PowerEdge R750 Technical Specifications on product documentation
page.
For more information about the VGA, see the Dell EMC PowerEdge
R750 Technical Specifications on product documentation page.
This port is USB 3.0-compliant.
Enables you to remotely access iDRAC. For more information, see the
iDRAC User's Guide at www.dell.com/poweredgemanuals.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16 s.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
expansion card guidelines
expansion card guidelines
expansion card guidelines
expansion card guidelines
System overview
section.
section.
section.
13