Rear View Of The System - Dell 7HT3R Installation And Service Manual

Rear view of the system

Figure 6. Rear view of the system
Table 6. Rear view of the system
Item Ports, panels, or slots
1 PCIe expansion card riser
1
2 BOSS riser
3 PCIe expansion card riser
2c
4 Power supply unit (PSU 1)
5
Power supply unit (PSU
2)
6
System identification
button
7
VGA port
8 OCP NIC port
9 USB 3.0 port
10 USB 2.0 port
11 iDRAC dedicated port
Icon Description
N/A
Enables you to connect PCI Express expansion cards.
N/A
Enables you to connect BOSS card.
N/A
Enables you to connect PCI Express expansion cards.
Indicates the PSU.
Indicates the PSU.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
● If the system stops responding during POST, press and hold
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
Enables you to connect a display device to the system.
N/A This port supports OCP 3.0.
This port is USB 3.0-compliant.
This port is USB 2.0-compliant.
Enables you to remotely access iDRAC. For more information, see
the iDRAC User's Guide at www.dell.com/poweredgemanuals.
Dell EMC PowerEdge R650xs system overview 13