WAGO 750-563 Manual page 37

2.1.1.9.5.1.3 Navigation Bar
With the navigation bar on the left side, you can change between the channels
of the module.
Fig. 2.1.1-9: Navigation between channels
You can select from among the following menu items:
Menu item
WAGO-I/O-SYSTEM 750
I/O Modules
750-563 [2 AO 0/4-20mA / 6-18V DC 16 Bit]
Description
[Channel 1]
opens a tree structure with Settings, Offset/Gain and Process data for
Channel 1.
[Settings]
opens a page where settings, e.g. Operation Mode, Number Format,
Output etc., are made (see chapter 2.1.1.9.5.1.4.1, "Settings").
[Offset/Gain]
opens a page for setting Offset/Gain (see chapter 2.1.1.9.5.1.4.2,
„Offset/Gain").
[Process data]
opens a page for setting the Process data (see chapter 2.1.1.9.5.1.4.3,
„Process data").
[Channel 2]
opens a tree structure with Settings, Offset/Gain and Process data for
Channel 2.
[Settings]
opens a page where settings, e.g. Operation Mode, Number Format,
Output etc., are made (see chapter 2.1.1.9.5.1.4.1, „Settings").
[Offset/Gain]
opens a page for setting Offset/Gain (see chapter 2.1.1.9.5.1.4.2,
„Offset/Gain").
[Process data]
opens a page for setting the Process data (see chapter 2.1.1.9.5.1.4.3,
„Process data").
Parameter Setting
• 37