WAGO 750-563 Manual page 43

The display field offers the following diagnostic possibilities:
Name
Common
Collective Fault
Output Error
Overload
Excess Temperature
Common
Power Supply
Low Voltage
K-Bus Voltage Too Low
Overstepping Limit Values
Upper Limit
Lower Limit
WAGO-I/O-SYSTEM 750
I/O Modules
750-563 [2 AO 0/4-20mA / 6-18V DC 16 Bit]
Input/ Description
Selection
No group error.
Group error present.
No output driver error (LAST).
Output driver error (LAST) present.
No output driver error (TEMP).
Output driver error (TEMP) present.
No output driver error (COM).
Output driver error (COM) present.
Load on 24 V system voltage OK.
Load on 24 V system voltage too small.
5 V system voltage OK.
5 V system voltage smaller 4.65 V.
Underrange limit value is not undershot.
Underrange limit value is undershot.
Overrange limit value is not exceeded.
Overrange limit value is exceeded.
Parameter Setting
• 43