Advanced functions
Type
The GEN2000 density and level gauges look similar and use the same
software. If your level transmitter indicates Density, it was set incorrectly for
a level application.
Procedure 4.10: To select the transmitter's type
1. Select Setup | Gauge Setup | Gauge Type.
2. Select Level.
Location
The local transmitter refers to a gauge that has its sensor electronics and
processing electronics all contained in the same housing.
Set a gauge to Remote if the sensor electronics and processing electronics
are in separate housings and the process signal connects to the auxiliary
input of the processing electronics.
Procedure 4.11: To select the transmitter's location
1. Select Setup | Gauge Setup | Transmitter Location.
2. Select Local or Remote.
72
LFXG-H Installation and Operation Guide