Standard Calibration Method - Vega FiberFlex LFXG-H Operating Instructions Manual

The figure illustrates the effect on the final output of using the non-linear
table vs. the linear table for the linearizer. Using the non-linear table
linearizer in the standard method produces a linear output.

Standard calibration method

This method requires collecting intermediate data points.
Cal Low Counts
Raw Sensor Counts
Cal High Counts
Min Level
LFXG-H Installation and Operation Guide
Maximum
Level
Indicated
Level
Minimum
Level
Minimum
Level
Cal Low
Level
Actual Level (engineering units)
Linearizer data collected at various process levels
Standard
Actual Level
Max Level
Cal High
Level
Simple
Maximum
Level
Min and Max Level data
points
Intermediate data points
Calibration
45