Type Plate; Configuration Of The Type Plate (Example) - Vega EL 11 Operating Instructions Manual

1.6 Type plate

Before mounting and electrical connection
please check if you use the suitable instrument.
Therefore note the type plate which is located
as follows:
The type plate contains important data required
for mounting and connection. The configuration
and components of the type plate are hence
explained in the following example.
16
Type plate

Configuration of the type plate (example)

®
VEGA EL 11
1
type EL11EXO.XGBVSTXXVKXX
see PTB Nr. EX-98.E.2085 EEx ia IIC T6
2
PTB 98 ATEX 2086
3
techn. data see document. / certificates
protection: IP 66/67 Insp.
length: 400mm
4
Ord. no. 123456/000
®
D-77757 Schiltach
Z-65.13.XXX
1 Master data of the order no.
2 Ex-certification number
Explosion protection version - note the
information and regulations of the certificate
3 Data of the electronics / Approvals
4 No. of the order confirmation /Pos.-no.
5 Number of the electrode type
6 Serial number
7 Test mark when used as part of an overfill
protection for vessels storing water
endangering liquids - note the information
and regulations in the general type approval
8 Manufacturing year
9 Number of the test authority
Order code
Detailled information on the order you will find
in the "Product Information Capacitive" or in the
"VEGA-Pricelist".
Capacitive electrodes EL 4 ... 20 mA - compact
Product description
0032
II 1/2G EEx ia IIC T6
1998
VVO: 02
ser. no. 10612892
5 6
7
9
8