Diagnostic alarms and HART messages
Diagnostic conditions that are currently in alarm alert users by:
• Diagnostics screens in the Messages box on the main Ohmview 2000
screen
• HART messages that appear when a HART device connects if the
diagnostic condition is selected in Alarms | Diagnostic Alarm
• Relay output if it is set as a diagnostic alarm relay in Alarms | Relay
Setup | Relay Functions
Relay Setup tab
Gauge status diagnostics screens
• To check the system's present status, select Diagnostics | Diagnostics
tab.
• For historical information, select the Diagnostic History and STDZ
History tabs.
LFXG-H Installation and Operation Guide
Diagnostics and repair
75