New Hardware Tab; Responding To The New Hardware Found Message; When New Hardware Is Installed; When New Hardware Is Not Installed - Vega FiberFlex LFXG-H Operating Instructions Manual

Advanced functions

New Hardware tab

Responding to the New hardware found message

When new hardware is installed

When you install a new CPU board or sensor assembly, you must verify
installation in Ohmview 2000 to enable new backups of the EEPROMs.
Procedure 4.3: To verify the "New Hardware Found" message
1. Select Diagnostics | New hardware | New CPU or New Sensor.
2. Click OK.

When new hardware is not installed

If the error message New hardware found appears, an EEPROM is
probably corrupt.
The messages "CPU EEPROM Corrupt" or "Sensor EEPROM Corrupt" may
also appear in the history.
66 LFXG-H Installation and Operation Guide