Removing The Adapters - DT SWISS 370 Technical Manual

Removing the Adapters

NOTE
Risk of damage of the adapters and the ball bearings!
The mounting pin must not touch the ball bearing while disassembling the adapters.
1. Plug the mounting pin into one of the adapters
(fig.3.1/2 or 8).
2. Push the mounting pin downwards (see picture).
3. Remove the adapter (fig.3.1/2 or 8) and the cover
(fig.3.1/1).
4. Repeat steps on the second adapter.
370 Technical Manual 10