DT SWISS 370 Technical Manual page 34

6. Slide a new spring (fig.3.3/10) onto the bearing
shell (fig.3.3/12).
The spring must not be damaged while mounting!
7. Slide the spring (fig.3.3/10) onto the pawls
(fig.3.3/9).
8. Check, if the spring sits inside the groove over the
complete circumference.
9. Check, if the pawls can be moved.
10. Grease the pawls (fig.3.3/9) slightly using universal
grease.
11. Grease the bearing generous.
370 Technical Manual 33