Safety - DT SWISS 370 Technical Manual

2 Safety

DANGER
Incorrect handling, installation, maintenance or servicing can lead to accidents causing severe
injuries or death!
• Compliance with the following provisions is a prerequisite for accident-free use and faultless functio-
ning.
• Assembly and maintenance of the component requires a basic knowledge of handling bicycle compo-
nents. If in any doubt, consult your retailer.
• Components should only be used in accordance with their intended use, otherwise the user shall as-
sume full responsibility.
• The component must be compatible with all parts of the bicycle.
• Only use original spare parts.
• The components must not be changed or modified.
• The component must not be used if it is damaged or there are any signs of damage. If in any doubt,
consult a DT Swiss service center.
DANGER
Risk of death caused by incorrectly assembled or faulty wheels and hubs!
• Check that the wheel is connected correctly before each ride.
• Before every use, check the function of the rear wheel hub. Make sure that the freewheel and engage-
ment connection function impeccably. Should there be any malfunction, the rear wheel hub must not
be used.
• Check the wheel for damage before and after each ride.
• Regularly check the spoke tension, rotation and wear of the wheel.
370 Technical Manual 7