DT SWISS 370 Technical Manual page 47

3. Slide the rotor (fig.3.4/7) onto the hub while per-
forming a rotary motion.
4. Check if the rotor can be turned easily and if the
pawls lock.
5. Grease the bearings and the inner surface of both
adapters (fig.3.4/1, 8).
6. Put on both adapters (fig.3.4/1, 8) and push them
in by hand.
Caution: The shorter adapter must be attached on the
drive side.
Closing Steps
Mount the cassette.
370 Technical Manual
Link
see instructions of
the manufacturer
46