DT SWISS 370 Technical Manual page 28

11. Remove the pawl carrier (fig.3.3/8) and the screw
fitting (fig.3.3/5).
Cleaning and Checking the Parts
1. Clean all parts of the hub (see
2. Check the needle cage, the pawls and the spring
for damages. Replace the parts if necessary.
3. Clean the rotor (fig.3.3/14) with a mild cleaner.
4. Check the rotor for damages.
Grooves from the cassette are no damages. These
are normal signs of usage.
5. Clean the rotor sealing with a mild cleaner.
6. Check the sealing for damages and replace if ne-
cessary.
7. Remove bad notches from the rotor (fig.3.3/14)
using a file.
8. Clean the rotor. Metal filings must be removed
completely.
Cleaning, p.6).
370 Technical Manual 27