Dismounting the Bearings
1. Hit the axle (fig.3.2/3) with a nylon hammer and
drive out the first bearing (fig.3.2/2).
2. Take the bearing (fig.3.2/2) from the axle
(fig.3.2/3).
3. Slide the axle (fig.3.2/3) through the second bearing (fig.3.2/2).
4. Repeat steps to drive out the second bearing.
Cleaning and Degreasing all Parts
1. Clean all parts of the hub (see
Cleaning,
p.6).
370 Technical Manual
18