Dismounting The Bearings; Cleaning The Parts - DT SWISS 370 Technical Manual

Dismounting the Bearings

1. Push the spacer (fig.3.1/4) beside and place a spin
drift on the edge of the ball bearing (fig.3.1/3).
2. Slightly drive out the ball bearing opposite the
disc-side.
3. Turn the hub 180°.
4. Put the mounting pin with its big diameter onto
the spacer.
5. Drive out the bearing (fig.3.1/3) on the disc-side.

Cleaning the Parts

1. Clean all parts of the hub (see Cleaning, p.6).
370 Technical Manual 11