Dismounting The Bearings - DT SWISS 370 Technical Manual

Dismounting the Bearings

1. Dismount the bearing (fig.3.3/3) opposite to the
drive side by hitting the axle (fig.3.3/4) with a ny-
lon hammer.
2. Remove the bearing (fig.3.3/3) from the axle
(fig.3.3/4).
3. Slide the axle (fig.3.3/4) through the bearing
(fig.3.3/13) on the drive side.
4. Drive out the bearing using a nylon hammer.
5. Remove the bearing (fig.3.3/13) from the axle
(fig.3.3/4).
370 Technical Manual 25