Required Tools; Removing The End Cap On The Drive Side - DT SWISS Ratchet LN Technical Manual

Wearing parts / Materials
DT Swiss universal grease

2.3 REQUIRED TOOLS

Tools
tool for ring nut
tool for ring nut
NOTICE
RISK OF DAMAGING THE ADAPTERS!
To avoid damages, only use grind clamping jaws, aluminum clamping jaws or special tools to
clamp the adapters.

2.4 REMOVING THE END CAP ON THE DRIVE SIDE

1. Pull off both end caps by hand.
If the end caps cannot be pulled off by hand,
clamp the end caps carefully into a vise with
ground clamping jaws and pull the hub / wheel
upwards.
8
Specification Quantity
Specification
Article number
20 g HXTXXX00NMG20S
Quantity Article number
1 HXTXXX00N5027S
1 HXTXXX00N5266S