Nortel Meridian 1 Administration And Maintenance page 55

Page 41 of 492
Chapter 2 — Feature descriptions
Call Forward All Calls
The Meridian 1 Call Forward All Calls feature allows only calls to the Prime
DN or a single appearance DN to be forwarded. For an ISDN BRI set, calls
are forwarded based on this basic service. Since ETSI CFU supplementary
service is developed based on the Call Forward All Calls feature, all the
existing feature interactions of Call Forward All Calls apply to ISDN BRI
terminals.
BRI Special Call Forward Busy
Call Forward No Answer
The ETSI CFU supplementary service takes precedence over BRI Call
Forward Busy, and Call Forward No Answer.
Call Forward and Busy Status
Call Forward and Busy Status allows a user to forward calls and monitor the
Call Forward and Busy Status from the forwarded-to user. This requires a
Busy/Forward Status key. An ISDN BRI terminal cannot monitor other set's
Call Forward Busy Status and in turn its Call Forward Busy Status cannot be
monitored by other sets.
Remote Call Forward
Remote Call Forward allows a user to program Call Forwarding from a
remote set. Call Forwarding remotely to an ISDN BRI terminal is supported.
However, using Remote Call Forward from an ISDN BRI terminal is not
supported.
Attendant and Network-wide Remote Call Forward
This feature allows the configuration of Call Forward from an Attendant
Console and a remote set across a Meridian Customer Defined Network
(MCDN). For an ISDN BRI terminal, Remote Call Forward is allowed from
a set, or from an Attendant Console, but not from a BRI set either locally or
network wide. When Call Forward is activated, it is assumed that the Call
Forward for the BRI set is voice, not data.
Option 11C ISDN BRI Administration and Maintenance