Nortel Meridian 1 Administration And Maintenance page 429
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Planning, installation and operating instructions (556 pages)
Table of Contents
Advertisement
Page 415 of 492
Chapter 8 — Service changes and maintenance
SCH5905
The appropriate DSL in this slot (DSL#0 for PREF or DSL#1 for SREF) is
not configured. Use LD 27 to configure the appropriate trunk clock source.
SCH5906
Either the appropriate DSL in this slot (DSL#0 for PREF or DSL#1 for SREF)
is not configured, or the slot must be a DTI, JDMI or PRI slot.
SCH5907
The clock on this DSL is referenced in the Digital Data Block. This reference
must be removed using LD 73 before the mode can be changed to NT.
SCH5908
The clock on this DSL is referenced in the Digital Data Block. Reference
must be removed using LD 73 before CLOK can be changed to NO on this
DSL.
SCH5919
The clock on this DSL is referenced in the Digital Data Block. Reference
must be removed using LD 73 before DSL can be removed.
SCH5926
The clock on this DSL is referenced by the DTI2/PRI2 system data. This
reference must be removed using LD 73 before the mode can be changed to
NT.
SCH5927
The clock on this DSL is referenced by the DTI2/PRI2 system data. This
reference must be removed using LD 73 before CLOK can be changed to NO
on this DSL.
SCH5928
The clock on this DSL is referenced by the DTI2/PRI2 system data. This
reference must be removed using LD 73 before this DSL can be removed.
SCH5929
DTI package is restricted. If the BRIT package is equipped, enter
TYPE =DTI2 or TYPE = PRI2.
SCH5930
The slot number is not a valid DTI/PRI/MISP slot. Configure the DTI/PRI
slot using LD 17 or configure the MISP using LD 27.
Option 11C
ISDN BRI Administration and Maintenance
Advertisement
Table of Contents
Troubleshooting
