Nortel Meridian 1 Administration And Maintenance page 307

Prompt Response
RCAP
NCT
RVQ,
ND1
ND2
NAS
BRI
COLP
DV1I
DV1O
DV2I
DV2O
DV3I
DV3O
... ....
Chapter 6 — ISDN BRI trunk implementation
Comment
Remote D-Channel capabilities.
Enter X followed by the option to remove the configured
capability.
This prompt is repeated until <cr> is entered.
NCT = Network Call Trace
RVQ = Remote Virtual Queueing
ND1 = Network Name Display 1
ND2 = Network Name Display 2
NAS = Network Attendant Service
BRI = allows ISDN line/trunk interworking)
COLP = Connected Line ID supplementary service (for
APAC Indonesia only).
These are QSIG SS Call Diversion Notification remote
capability responses, used to configure sending of
QSIG Diversion Notification Information, treatment of
Rerouting request and coding of operations. If coded as
Object Identifier, the remote capability ends with 'O",
whereas for Integer Value, the remote capability ends
with 'I'. Only one remote capability is allowed.
Refer to Table 19, "Remote Capability Meanings for
ISDN BRI routes," on page 294 for more information.
....
Option 11C ISDN BRI Administration and Maintenance
Page 293 of 492