Nortel Meridian 1 Administration And Maintenance page 140

Page 126 of 492
553-3011-311 Standard 7.0
Chapter 2 — Feature descriptions
The terminal performing the override must have a priority level equal to or
higher than the terminal being overridden. To activate Priority Override, the
user of a 500/2500 terminal dials the Override Flexible Feature Code, while
the user of a M1000 series or Meridian digital terminal presses the Override
key (OVR). Priority Override can also be activated using the Enhanced
Override Flexible Feature Code or the Enhanced Override key (EOVR).
Forced Camp-on is partially supported on ISDN BRI terminals, as explained
below:
— Forced Camp-on to an ISDN BRI terminal is not possible, because
Forced Camp-on requires Warning Tone Allowed Class of Service
(ISDN BRI terminals are defaulted to WTD COS);
— Forced Camp on from an ISDN BRI terminal is not possible because
feature keys and FFC are not supported for ISDN BRI;
— a BRI terminal transferred to a non-BRI terminal may be have forced
camp-on applied to it, if no COS restrictions apply; however, the ISDN
BRI terminal display is not updated.
Intercept Computer Interface
This feature allows the Meridian 1 to use an intercept (attendant assistance
service) computer for storing and retrieving call messages. Calls to an absent
tenant's DN using this feature are routed to a designated Intercept Position
(ICP) DN. A terminal at the ICP displays a message stating why the tenant
at the DN is absent. The person at the ICP can then store the caller's message
for the tenant's DN and activate the message waiting LED at the tenant's
telephone. The tenant at the DN retrieves the stored caller messages by
calling the ICP, where the messages are displayed on the terminal (or
optionally printed).
The feature can be activated or deactivated by the following:
— Flexible Feature Code (FFC) dialed from the tenant's telephone. This
code specifies the reason for the tenant's absence and can be extended
with a date and time as extra information. The FFC decodes into a text
message;
— Pressing the Call Forward All Calls (CFW AC) key on an SL-1 telephone
(deactivation);
May 1999